$put_perv_real = "/home/www/dvakompa-ru/dopol/"; ?>
Ещё один вариант меш сети
HyperModem is a low-powered electronic device that connects computers to the global off-the-grid communication network.
This device effectively creates a mesh network node which utilizes every available communication medium, be it a local wireless connection, the Internet or anything else.
HyperModem built with a Raspberry Pi, connected to a regular SOHO router:
HyperModem’s web interface:
An Android phone connected to HyperModem:
Download or build HyperModem image from source.
Install the image on your device.
Power on HyperModem device and connect it to your SOHO router (if you want).
Find HyperModem’s IPv4 address in a local network, for example 192.168.1.101
. Alternatively, connect to a wireless network “HyperModem” and use 192.168.177.1
.
Open this IP address in a web browser and login to the web interface.
Configure the root password
HyperModem is ready to use! Computers in your router’s LAN should now receive an IPv6 address from 300::/8 space and must be able to use the Yggdrasil Network.
Feel free to customize your HyperModem with additional hardware and software mods.
Raspberry Pi B/B+/CM/Zero/ZeroW: DOWNLOAD
Raspberry Pi 2B/3B/3B+/3CM: DOWNLOAD
Install to Raspberry Pi’s SD card /dev/sdX:
zcat filename.img.gz | sudo dd of=/dev/sdX bs=4M status=progress
Ещё один вариант меш сети
HyperModem is a low-powered electronic device that connects computers to the global off-the-grid communication network.
This device effectively creates a mesh network node which utilizes every available communication medium, be it a local wireless connection, the Internet or anything else.
HyperModem built with a Raspberry Pi, connected to a regular SOHO router:
HyperModem’s web interface:
An Android phone connected to HyperModem:
Download or build HyperModem image from source.
Install the image on your device.
Power on HyperModem device and connect it to your SOHO router (if you want).
Find HyperModem’s IPv4 address in a local network, for example 192.168.1.101
. Alternatively, connect to a wireless network “HyperModem” and use 192.168.177.1
.
Open this IP address in a web browser and login to the web interface.
Configure the root password
HyperModem is ready to use! Computers in your router’s LAN should now receive an IPv6 address from 300::/8 space and must be able to use the Yggdrasil Network.
Feel free to customize your HyperModem with additional hardware and software mods.
Raspberry Pi B/B+/CM/Zero/ZeroW: DOWNLOAD
Raspberry Pi 2B/3B/3B+/3CM: DOWNLOAD
Install to Raspberry Pi’s SD card /dev/sdX:
zcat filename.img.gz | sudo dd of=/dev/sdX bs=4M status=progress
https://popura-network.github.io/posts/hypermodem/